ONLINE
STORE
"ASK THE BACH MAN"
FORUM
PARTS, SERVICE,
& INFORMATION
CATALOGS AND
BROCHURES

Welcome, Guest. Please login or register.
Did you miss your activation email?
November 18, 2017, 06:11:31 AM
Home Help Search Login Register
News: Please read the Forum Code of Conduct   >>Click Here <<
+  Bachmann Message Board
|-+  Discussion Boards
| |-+  General Discussion
| | |-+  What Sound decoder works with Spectrum sd-40 with DCC
« previous next »
Pages: [1] Print
Author Topic: What Sound decoder works with Spectrum sd-40 with DCC  (Read 1092 times)
1960bugeye

View Profile
« on: November 07, 2009, 06:06:32 PM »

My son and I added DCC to our layout last year abd love it. We could only afford DCC equiped locomotives without sound. But since have added a few DCC with Sound loco and it has totally changed how much we use the layout. It is so much more fun with the sound.

I have seen an MRC addon sound decoder but it looks like it requires soldering. Not a skill I currently have. My son really doesn;t want me to ruin the trains. Smiley

Any drop in or replacement decoders I can use ?

Thanks.
Logged
ABC
Guest
« Reply #1 on: November 07, 2009, 06:37:06 PM »

Are you referring to decoders with a harness with a 8 or 9 pin plug?
Unfortunately, there are not any sound only decoders that have an 8 pin plug, so they would all require soldering. The sound only decoders cost about $40. The decoders that are multifunction and include sound often times are equipped with a harness for an 8-pin plug and start at $80. The sound only decoders do not include digital control of the motor, they only control the sound. Also you may have to purchase a speaker separately which will cost a bit more depending on what you buy.
Your 2 choices are to buy a soldering iron and learn how to solder (this will also pay dividends in the future Grin ) or to spend at least twice as much so that you have a decoder with an 8-pin plug .
Logged
NarrowMinded


View Profile
« Reply #2 on: November 07, 2009, 08:23:26 PM »

Another choice is to pay the tech at the local train shop to install the unit. if you don't have a local shop there, then I geuss you will have to bite the bullet, and ABC is right, Learning to solder is a good money saving skill to have. just do yourself a favor and buy a high quality soldering "Pencil" and quality solder. you will find yourself fixing more then your trains. I suggest you find an old circuit board from something and practice removing components and resoldering them to get the hang of it.

NM
Logged
Pages: [1] Print 
« previous next »
Jump to:  
Powered by SMF | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!