ONLINE
STORE
"ASK THE BACH MAN"
FORUM
PARTS, SERVICE,
& INFORMATION
CATALOGS AND
BROCHURES

Welcome, Guest. Please login or register.
Did you miss your activation email?
June 18, 2018, 12:05:37 AM
Home Help Search Login Register
News: Check out the photo gallery link above or >click here< to see photos of recently announced products!
+  Bachmann Message Board
|-+  Discussion Boards
| |-+  Large
| | |-+  Wiring for lights on Jackson Sharp Passenger car kits
« previous next »
Pages: [1] Print
Author Topic: Wiring for lights on Jackson Sharp Passenger car kits  (Read 2039 times)
Young

View Profile
« on: August 04, 2011, 05:45:31 AM »

Hi guys,

I am assembling one of these kits but cannot see how to wire the lighting circuit. Photo of parts location not clear enough for me to see which wire goes where. Any advice will be greatly appreciated!

Thanks,

Bazza
Logged
Young

View Profile
« Reply #1 on: August 10, 2011, 10:33:57 AM »

Hi Guys,

It's me again!

Has no-one assembled one of these kits yet?

Bachmann's Service Dept cannot help me - so it is over to you guys. Any help and guidance welcomed!

Bazza
Logged
Sleeping Bear

A genuine ALCOholic


View Profile
« Reply #2 on: August 10, 2011, 11:12:30 AM »

  I haven't done a new kit , but have put together an older Bighauler kit as well as tore into a few used. Most of mine have been battery powered and one I converted from track power. It seems to me that it didn't really matter witch way the the power ran as long as it was kept consistent through out the car. Run your positive lead up one side and into your lights and your neg out and down the other side. For track powered cars , make sure that when on the track that both pos pickups are on the same rail and both neg pickups are on the other.     Hope this helps.....S.B.
Logged

"If at first you don't succeed....Get a bigger hammer"
jsmvmd

View Profile
« Reply #3 on: August 10, 2011, 11:40:07 AM »

Dear Friends,

Anyone remember the LED kit, battery powered that came as a string of LED's that fastened or were taped to the inner roof of the shell ?  It seems to me this was mentioned here a few years ago, or perhaps on the LS forum.  Thanks.

Jack
Logged
Young

View Profile
« Reply #4 on: August 23, 2011, 08:39:51 AM »

Hi Guys,

Thanks for your replies, sorry I did not get back sooner but my computer died and I have been disconnectede from the web.

Will try and get those lights to work now.

Bazza
Logged
Pages: [1] Print 
« previous next »
Jump to:  
Powered by SMF | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!