ONLINE
STORE
"ASK THE BACH MAN"
FORUM
PARTS, SERVICE,
& INFORMATION
CATALOGS AND
BROCHURES

Welcome, Guest. Please login or register.
Did you miss your activation email?
January 17, 2018, 10:05:51 PM
Home Help Search Login Register
News: Please read the Forum Code of Conduct   >>Click Here <<
+  Bachmann Message Board
|-+  Discussion Boards
| |-+  On30
| | |-+  On30 Shay slope ability
« previous next »
Pages: [1] Print
Author Topic: On30 Shay slope ability  (Read 1646 times)
L8GR8N8

View Profile
« on: March 20, 2013, 10:17:42 AM »

New to the board, but haven't been able to find anything about the capability of the On30 Shay models to climb.  Some books record some Shays as climbing 10 percent or better slopes.  I think that would make an interesting model, especially with zig-zag like at Cass or Roaring Camp in Felton, CA, but the model would have to be able to handle the grade.  Any info?
Logged
Stevelewis

That IS Flying Scotsman (Not a photshop!!)


View Profile
« Reply #1 on: March 20, 2013, 12:05:35 PM »

As a long  time  user  of bachmann Shays  I can  telllyou  they  will  work  on gradients  far in excess of  the'Real' thing

Sugesst  you  may  want  to  try  a  shay  on a plank of  wood  with  some  track laid on it  and  gradually increase  the  gradient... you may be pleasantly  surprised.
Logged

STEVE LEWIS   North  WALES   UK

Close  to  the  Great  Little  Trains  Of Wales!!
TimR

Ephraim Shay, the Man


View Profile
« Reply #2 on: March 20, 2013, 05:28:14 PM »

Just one word of caution regarding Shays and slopes. They go UP the grades beautifully, but they get a bit herky-jerky on the downslope due to the backlash in the drivetrains. If you keep the speed up, it doesn't look bad. However, if I wanted to highball around a layout I would have bought a diesel....or just a Lionel.  Roll Eyes

This jerky motion on the downslopes is one reason I was so keen on the Heisler. It exhibits none of that.
Logged
ebtnut

View Profile
« Reply #3 on: March 20, 2013, 06:30:53 PM »

I might point out that the backlash issue is not limited to the Shays.  I've seen a lot of regular rod engine models from different manufacturers that exhibit the same problem  In the case of steam locos with "conventional" drives (motor with worm attached or into a gearbox) the issue can usually be corrrected by inserting thrust washers to elminiate the back-and-forth movement of the motor/gear shaft. 
Logged
Stevelewis

That IS Flying Scotsman (Not a photshop!!)


View Profile
« Reply #4 on: March 22, 2013, 06:27:36 AM »

The  above  mentioned downward  performance  issue  can  be  corrected  by adjustment of some  CVs, I will check  what  these  are  and  post  later,  unless someone  has  the  info to  hand?
Logged

STEVE LEWIS   North  WALES   UK

Close  to  the  Great  Little  Trains  Of Wales!!
Pages: [1] Print 
« previous next »
Jump to:  
Powered by SMF | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!