ONLINE
STORE
"ASK THE BACH MAN"
FORUM
PARTS, SERVICE,
& INFORMATION
CATALOGS AND
BROCHURES

Welcome, Guest. Please login or register.
Did you miss your activation email?
November 21, 2017, 11:26:49 AM
Home Help Search Login Register
News: Check out the photo gallery link above or >click here< to see photos of recently announced products!
+  Bachmann Message Board
|-+  Discussion Boards
| |-+  N
| | |-+  Bachmann Heavy Mountain
« previous next »
Pages: [1] Print
Author Topic: Bachmann Heavy Mountain  (Read 1382 times)
inkaneer

View Profile
« on: September 07, 2015, 01:56:00 PM »

I got a Bachmann heavy mountain and an EM1 that I want to add sound to.  Any recommendations on a sound decoder?
Logged
gatrhumpy

View Profile
« Reply #1 on: September 07, 2015, 02:34:49 PM »

I have a Soundtraxx on mine, but you could use an ESU LokSound Select Micro if you want to. The ESU has superior motor control.
Logged
gatrhumpy

View Profile
« Reply #2 on: September 07, 2015, 02:56:08 PM »

I would highly suggest a 8mm x 12mm sugar cube speaker either from SBS4dcc or the same size zimo speaker from MB Klein.
Logged
Mike C

View Profile
« Reply #3 on: September 08, 2015, 11:07:40 AM »

 I put a soundtraxx  TSU 750 into my 2-10-2 with a 1/2" round speaker . Its not too difficult , just unsolder the stock decoder and solder in the new one . I did have to modify the coal load a bit to get the speaker to fit well .  Also you WILL need a speaker enclosure ,soundtraxx makes one to fit the speaker .  The ESU is a bit smaller decoder and should work well also .
Logged
Pages: [1] Print 
« previous next »
Jump to:  
Powered by SMF | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!