ONLINE
STORE
"ASK THE BACH MAN"
FORUM
PARTS, SERVICE,
& INFORMATION
CATALOGS AND
BROCHURES

Welcome, Guest. Please login or register.
Did you miss your activation email?
November 22, 2017, 08:32:01 AM
Home Help Search Login Register
News: Check out the photo gallery link above or >click here< to see photos of recently announced products!
+  Bachmann Message Board
|-+  Discussion Boards
| |-+  Williams by Bachmann
| | |-+  WBB E7 With 2 DC Motors NOW With BlueRail installed!
« previous next »
Pages: [1] Print
Author Topic: WBB E7 With 2 DC Motors NOW With BlueRail installed!  (Read 7052 times)
Seaboard Air Line Fan

View Profile
« on: July 26, 2016, 10:20:14 AM »

Anybody know what the stall current is on this engine with 2 motors?

I'm considering installing the BlueRail board for battery powered remote control.

BobD.
« Last Edit: August 04, 2016, 11:52:57 AM by Seaboard Air Line Fan » Logged
phillyreading

View Profile
« Reply #1 on: July 27, 2016, 08:54:34 AM »

Have you used a digital volt or amp meter to find out?
Usually most Williams engines have a 6 amp circuit board installed, if that helps you.

Lee F.
Logged
Grapevine Flyer

View Profile
« Reply #2 on: July 29, 2016, 07:50:51 PM »

I see you got it working. Looks great.

https://www.youtube.com/watch?v=eD33wmSBj2s
Logged
Seaboard Air Line Fan

View Profile
« Reply #3 on: July 30, 2016, 09:25:40 AM »

I see you got it working. Looks great.

https://www.youtube.com/watch?v=eD33wmSBj2s

Thanks for posting the link!

I ordered the BlueRail board Tuesday and got it Thursday, 2 days coast-to-coast ain't bad.

Had it installed a couple hours later.  I ran it for 2+ hours yesterday and so far the Williams E7 is running great, no problem with the 2 motors.

I mounted the on/off switch and charging jack thru the rear door.  Painted they're hardly noticeable and with a diaphragm mounted you can't see them unless you get directly behind the engine.  I'm using a 9.6v NiMh, 2000Mah 1.1"x1.1"x3.9" battery pack I got from All-Battery.  The circuit board and battery fit nicely between the motors.

While I had the E7 apart I replaced the diecast fuel/water tank with one I made from styrene, not sure if you can see it in that video.

Bachmann needs to start offering the Williams line with the bluetooth boards  Wink

BobD.
« Last Edit: July 30, 2016, 09:30:22 AM by Seaboard Air Line Fan » Logged
Yardmaster
Administrator


View Profile
« Reply #4 on: August 10, 2016, 04:37:58 PM »

Nice! Great idea!
Logged
Country Joe

View Profile
« Reply #5 on: August 11, 2016, 08:54:00 AM »


Bachmann needs to start offering the Williams line with the bluetooth boards  Wink

BobD.



I agree 100%, Bob. I think they would be very strong sellers. I certainly would buy them.
« Last Edit: August 11, 2016, 08:56:16 AM by Country Joe » Logged
Seaboard Air Line Fan

View Profile
« Reply #6 on: August 18, 2016, 06:31:05 PM »


Bachmann needs to start offering the Williams line with the bluetooth boards  Wink

BobD.



I agree 100%, Bob. I think they would be very strong sellers. I certainly would buy them.

Yes indeed Joe.  I'm having a blast running my WbB E7 with plans to install the BlueRail board in one of the new-ish WbB semi-scale 4-6-2 soon IF there's room in the tender for the battery.  I'll be checking that soon.

I think this bluetooth thing may open the door for folks of all ages to get excited about trains.  I know it has for this young train buff (I'll be 65 this month  Grin!).

BobD.
Logged
rhwalker

View Profile
« Reply #7 on: August 26, 2016, 05:57:17 PM »

I have two Williams locos battery powered with bluerail boards and one track powered as well. All three perform very nicely. This system is a major step forward.
Logged
Country Joe

View Profile
« Reply #8 on: August 27, 2016, 10:01:16 AM »


Bachmann needs to start offering the Williams line with the bluetooth boards  Wink

BobD.



I agree 100%, Bob. I think they would be very strong sellers. I certainly would buy them.

Yes indeed Joe.  I'm having a blast running my WbB E7 with plans to install the BlueRail board in one of the new-ish WbB semi-scale 4-6-2 soon IF there's room in the tender for the battery.  I'll be checking that soon.

I think this bluetooth thing may open the door for folks of all ages to get excited about trains.  I know it has for this young train buff (I'll be 65 this month  Grin!).

BobD.

Happy Birthday Bob! I'm a little older than you (67 in January) and I know what you mean. I have 3 Lionel LionChief Plus locos (very similar to bluetooth) and love them. I'm hoping WBB will offer locos with bluetooth already installed very soon. It's so much more fun than running trains conventionally.

Was the install of the BlueRail board difficult? I'm not that good with electronics and a little wary of trying an installation myself.
Logged
Seaboard Air Line Fan

View Profile
« Reply #9 on: August 28, 2016, 07:58:44 PM »

Joe,

Not hard, but I did spend some time back in the 70s-80s as an electronics tech at Norfolk Naval Shipyard, so I know my way around a soldering iron.

The instructions under "Our First Board" that BlueRail has on their site are pretty straight forward.  There's 2 wires that go to the battery assembly (battery, on/off switch, charging jack), 2 wires going to the motor, and 3 wires going to the headlight/rear light LEDs (1 of the wires is regulated +12v).  Buy the board with the battery wires already wired in and get the 9 pin to 8 pin cable (although I cut the 8 pin board off and solder the wires to where I want them to go).

That's basically it, there are more wires you can use but that's up to what you have in your engine.  I used the wire(s) for ACC3 to light a "Mars" light on my Williams E7.  Actually it's a LED with the lens colored red using a red sharpie, need to get one of those Mars Light simulators from N Gineering to replace the LED.

Probably the hardest thing is finding a spot in your loco to put things and trying to keep the wiring so it doesn't look like a bowl of spaghetti.

I usually try to find a battery pack of the voltage and amperage I need and go from there.  I just put a 12v, 2000Mah battery pack in a G gauge Bachmann 4-6-0, but my O-scale engines use either a 9.6v, 2000Mah NiMh or 11.1v, 2200Mah LiPo battery pack from All-Battery.  The 12v pack I just bought I got from their Ebay site for $22 shipped, I've gotten the 9.6v for $15 shipped in the past.  Not a bad price.  I'm going to look into how much it costs to make your own battery packs to see if that way is cheaper or worth the effort.

Look at the videos they have on the BlueRail site to see what's been done so far.

Oh, and thanks for the B-day wishes!!!

BobD.
Logged
Seaboard Air Line Fan

View Profile
« Reply #10 on: August 28, 2016, 08:02:51 PM »

Oh...Got my 3rd BlueRail board the other day and now have the new-ish WbB semi-scale 4-6-2 wired up, just haven't taken a video yet, but it's running as expected so far.

Also got a Gems 2" Bluetooth speaker from Target for $5 the other day.  I can put it on/in a flat car or gondola and play the sounds thru it vice thru my Ipad and it sounds great.  Need to figure out how to move the guts from the speaker housing into the engine.

BobD.
Logged
Country Joe

View Profile
« Reply #11 on: August 29, 2016, 03:22:51 PM »

Thanks Bob. I'll check out the videos.
Logged
Pages: [1] Print 
« previous next »
Jump to:  
Powered by SMF | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!