ONLINE
STORE
"ASK THE BACH MAN"
FORUM
PARTS, SERVICE,
& INFORMATION
CATALOGS AND
BROCHURES

Welcome, Guest. Please login or register.
Did you miss your activation email?
November 22, 2017, 01:11:33 AM
Home Help Search Login Register
News: Please read the Forum Code of Conduct   >>Click Here <<
+  Bachmann Message Board
|-+  Discussion Boards
| |-+  On30
| | |-+  Rail Bus sound module?
« previous next »
Pages: [1] Print
Author Topic: Rail Bus sound module?  (Read 1166 times)
Tom_C

View Profile
« on: December 26, 2016, 07:49:35 PM »

I have the rail bus http://shop.bachmanntrains.com/index.php?main_page=product_info&cPath=879_755_789_803_804&products_id=5220&zenid=d06knli4cecqpa4fp1pln2mdp1

What sound module do I need for this?  Does it have all the wiring and speaker ready for sound, or would I need to add more stuff?

Also, I man-handled the cab and popped out a window, and I need to know how to take the chassis apart to get access to the inside to replace the window.  The instructions or other info I've seen online don't show how to get the cab off the chassis for access to the inside.
Logged
Flare

View Profile
« Reply #1 on: December 26, 2016, 08:14:17 PM »

I'm not sure if this helps at all, but this is Bachmann's exploded view diagram page of the Rail Bus which gives an idea of how it comes apart and back together:

http://www.bachmanntrains.com/home-usa/dwg/dwgs/28457.pdf


It shows that the pre-installed decoder connects to a standard socket so swapping it for a sound-equipped decoder should be easy once you get it apart.

It does not show a pre-installed speaker, but there does appear to be a cutout for a speaker in the roof near the decoder socket.
Logged
Tom_C

View Profile
« Reply #2 on: December 26, 2016, 08:34:42 PM »

Thanks very much.  I have that exploded view but will study it more thoroughly and see if I can figure out how to get the chassis apart.

As for the sound, I'm fine with basic sound.  I know people do a lot of modifications to add sound, but I just want a basic install.
Logged
the Bach-man
Administrator


View Profile
« Reply #3 on: December 26, 2016, 10:36:09 PM »

Dear Tom,
I used a SoundTraxx decoder, mounted in the roof.
Make sure to vent it into the passenger compartment so it doesn't overheat.
Happy New Year!
the Bach-man
Logged
Tom_C

View Profile
« Reply #4 on: January 07, 2017, 05:51:26 PM »

Thanks.

Can you tell me what the 2 components are on the NMRA plug in the railbus?  

From all indications it appears that they're diodes to connect both the Yellow (backup light) and the white (headlight) to the NC connection on the 8 pin socket.  

Is there a schematic available of the railbus circuit board?
« Last Edit: January 07, 2017, 05:54:45 PM by Tom_C » Logged
Pages: [1] Print 
« previous next »
Jump to:  
Powered by SMF | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!