Welcome, Guest. Please login or register.
Did you miss your activation email?
August 21, 2018, 03:35:30 AM
Home Help Search Login Register
News: Check out the photo gallery link above or >click here< to see photos of recently announced products!
+  Bachmann Message Board
|-+  Discussion Boards
| |-+  General Discussion
| | |-+  What does the # mean
« previous next »
Pages: [1] Print
Author Topic: What does the # mean  (Read 1165 times)

View Profile
« on: April 27, 2017, 05:09:03 PM »

 :)What Does the #'s under the track mean? Like 92124A2-1
Joe Satnik

View Profile WWW
« Reply #1 on: April 27, 2017, 05:50:29 PM »

Hi, Engandy.

I'm guessing you're looking at an HO scale or N scale piece of E-Z Track.

It's possibly a die number (not referenced in the consumer catalog) for molding the E-Z Track plastic track bed.

Tell us more about the track.

HO or N ?

Is the track bed black or gray ?

Straight or curved?

If straight, how long ?

How many ties ?

If curved, do you have enough of them to form a complete circle?

How many to form a complete circle ?

How big is the circle ? Measure outside edge of track bed to inside edge of track bed on opposite side of circle.


Joe Satnik

Edit: Changed 'roadbed' to 'track bed'.

« Last Edit: April 27, 2017, 05:53:38 PM by Joe Satnik » Logged

If your loco is too heavy to lift, you'd better be able to ride in, on or behind it.

View Profile
« Reply #2 on: April 27, 2017, 06:32:14 PM »

I have HO E-Z track 10 have 18R-30degree and 26 HO Curve If when I put the together
 I have 3 circle using 12 to make the 3 circles.

View Profile
« Reply #3 on: April 27, 2017, 07:43:55 PM »

Could be wrong, of course, but believe those numbers are manufacturing lot numbers, like where and when kinda stuff.  I have several pieces of 18"R N/S EZ Track but they have a different series of numbers, similar to the ones you are referring to, but the numbers are not identical.

Keep Calm and Carry On
James in FL

View Profile
« Reply #4 on: April 27, 2017, 10:32:31 PM »

In N scale, the number you posted would be the part number.
Other numbers include the degrees curvature, the radius, and the patent number(s).
I donít see any date code or machine number, but I have very little EZ track to look at.
The example I gave was for a 19r 15į NS N Scale curve which has 3 patent numbers.

Not sure how safe it is to assume that HO track would be the same.
« Last Edit: April 28, 2017, 02:27:35 AM by James in FL » Logged
Pages: [1] Print 
« previous next »
Jump to:  
Powered by SMF | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!