ONLINE
STORE
"ASK THE BACH MAN"
FORUM
PARTS, SERVICE,
& INFORMATION
CATALOGS AND
BROCHURES

Welcome, Guest. Please login or register.
Did you miss your activation email?
November 25, 2017, 01:32:08 AM
Home Help Search Login Register
News: Please read the Forum Code of Conduct   >>Click Here <<
+  Bachmann Message Board
|-+  Discussion Boards
| |-+  HO
| | |-+  volume with BAchmann EZ command
« previous next »
Pages: [1] Print
Author Topic: volume with BAchmann EZ command  (Read 387 times)
bob kaplan

View Profile
« on: August 03, 2017, 08:32:11 PM »

Can EZ command control the volume of BLI engines?...and if so, how?   Thanks!!
Logged
Flare

View Profile
« Reply #1 on: August 03, 2017, 09:02:46 PM »

No, you'll need a more advanced controller to adjust the volume CVs.
Logged
Hunt
?
MBB


View Profile
« Reply #2 on: August 03, 2017, 09:06:19 PM »

Depends on decoder -

If Paragon 2 Diesel decoder
Pressing Function 8 once mutes the volume and reverses the volume control direction.  Double pressings Function 8 causes the volume to either increase or decrease by a factor of step size (CV130).
Logged
bob kaplan

View Profile
« Reply #3 on: September 16, 2017, 10:06:12 AM »

I did note this:
    if the BLI is producing a sound and the red LED is flashing because you have pressed the yellow button;
 press the # 8 button somewhat rapidly (if you press it once, the sound is turned off) an even number of times (example 10 or 12 times) the volume WILL decrease.  If you do this too many times the volume will begin to increase again.

This does not change the start up sound value however.  It will be back at the same level the next time you use the engine.
Logged
Pages: [1] Print 
« previous next »
Jump to:  
Powered by SMF | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!