ONLINE
STORE
"ASK THE BACH MAN"
FORUM
PARTS, SERVICE,
& INFORMATION
CATALOGS AND
BROCHURES

Welcome, Guest. Please login or register.
Did you miss your activation email?
November 20, 2017, 11:15:05 AM
Home Help Search Login Register
News: Please read the Forum Code of Conduct   >>Click Here <<
+  Bachmann Message Board
|-+  Discussion Boards
| |-+  General Discussion
| | |-+  Track Questions
« previous next »
Pages: [1] Print
Author Topic: Track Questions  (Read 398 times)
mpoteraj

View Profile
« on: October 05, 2017, 03:04:30 PM »

Q1: What scale would my train be with tracks with an inside Deminsion of 45mms?

Q2: What is the total length can a track be while using OEM transformer?
Logged
Piyer


View Profile WWW
« Reply #1 on: October 05, 2017, 03:28:25 PM »

1) 45mm gauge would be 16mm scale (1:19 scale)

2) Number of locomotives and the amount of electricity they require (plus the demands of anything else, such as passenger carriages, that draw power directly from the rails) is the greater limiter of a transformer than layout size itself. That said, the more track you have, the greater the need there is for applying power from more than a single point. This is done with bus wires and feeder wires - think of these as the big water main (bus) and the individual water lines leading to each customer (feeders).
Logged

~AJ Kleipass~
Actively modeling in N, HO, and 2-rail O scales.
Hunt
?
MBB


View Profile
« Reply #2 on: October 05, 2017, 04:04:49 PM »


Q1: What scale would my train be with tracks with an inside Deminsion of 45mms?


Depends.  Models  1:32, 1:22.5  and 1:20.3 are scale proportion (model to prototype ) commonly found gauged to run on track that  measures 45 mm between the railheads.
 
Bachmann makes large scale train in both 1:20.3 and 1: 22.5 gauged to run on 45 mm track.


Logged
mpoteraj

View Profile
« Reply #3 on: October 09, 2017, 02:12:01 AM »

Thank you to both of you.  Appreciate the responses.  I have a Bachmann 'large' scale set. iIn regards top the power issue I assume an indicator would be a reduced performance of locomotive if track length creates to much resistance and there is a solution.
Logged
Len

View Profile
« Reply #4 on: October 09, 2017, 06:32:50 PM »

The solution to loss of power from increased track length is to add additional power feeders from the power supply. Adding a power feeder to a spot opposite the existing feeder is a good place to start.

Len
Logged

If at first you don't succeed, throw it in the spare parts box.
Pages: [1] Print 
« previous next »
Jump to:  
Powered by SMF | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!