ONLINE
STORE
"ASK THE BACH MAN"
FORUM
PARTS, SERVICE,
& INFORMATION
CATALOGS AND
BROCHURES

Welcome, Guest. Please login or register.
Did you miss your activation email?
November 24, 2017, 04:09:52 PM
Home Help Search Login Register
News: Check out the photo gallery link above or >click here< to see photos of recently announced products!
+  Bachmann Message Board
|-+  Discussion Boards
| |-+  General Discussion
| | |-+  conversion of a 4-6-2 Bachmann spectrum steam locomotive from DC to DCC
« previous next »
Pages: [1] Print
Author Topic: conversion of a 4-6-2 Bachmann spectrum steam locomotive from DC to DCC  (Read 241 times)
sonny

View Profile
« on: October 25, 2017, 11:50:26 AM »

I have a subject locomotive that I wish to convert from DC to DCC but have no schematic or layout of the locomotive.  I prefer  information regarding how to safely take the locomotive apart so I can be sure the motor can be isolated, a decoder that might be used, and the wiring installation from the tender, where the decoder would be installed, and how to get power to the decoder as there are no power pickups in the tender or from the tender wheels.
Logged
Len

View Profile
« Reply #1 on: October 25, 2017, 12:24:20 PM »

If there are no power pickups on the tender it's probably the older split frame 4-6-2. Instructions for installing a decoder can be found on the TCS site here: http://www.tcsdcc.com/Customer_Content/Installation_Pictures/HO_Scale/Bachmann/K4_Pacific_4-6-2/bachman_n_scale_k4_pacific_4_6_2.htm

While they are showing a TCS decoder being installed, any decoder with the same approximate dimensions could be used.

Len
Logged

If at first you don't succeed, throw it in the spare parts box.
Trainman203

View Profile
« Reply #2 on: October 25, 2017, 01:45:19 PM »

OR .... you could pay to have it installed, know it would work, and know that you didn't ruin the decoder and maybe the engine in the process! 😱😮😂

I've had about 20 installs done.  Maybe about 50 bucks labor vs. minimum $75 / $100 X 2 ruined decoder replacement and possibly another 150 / 200 for the engine.

Contracting that work out pays, for me.😎
Logged

Modeling the New Iberia and Northern 1945
guy57

View Profile
« Reply #3 on: October 30, 2017, 03:50:35 PM »

AMEN brother, I did a Thomas SALTY locomotive...no tender, so everything had to fit in the loco. it took a while and I smoked a decoder in the process, but if you're up for a challenge then that's exactly what you'll get....Good luck and don't forget to ask for help if you hit a brick wall......there's a lot of experience on this website
Logged
Pages: [1] Print 
« previous next »
Jump to:  
Powered by SMF | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!