ONLINE
STORE
"ASK THE BACH MAN"
FORUM
PARTS, SERVICE,
& INFORMATION
CATALOGS AND
BROCHURES

Welcome, Guest. Please login or register.
Did you miss your activation email?
November 23, 2017, 05:24:05 AM
Home Help Search Login Register
News: Please read the Forum Code of Conduct   >>Click Here <<
+  Bachmann Message Board
|-+  Discussion Boards
| |-+  General Discussion
| | |-+  EZ Track
« previous next »
Pages: [1] Print
Author Topic: EZ Track  (Read 167 times)
Whiterg

View Profile
« on: November 01, 2017, 10:51:50 AM »

Does Bachmann have any intention of manufacturing either a 22" or 26" Radius Curve rerailer with wire track similar to the 18" track #44502 it already has?
Logged
Trainman203

View Profile
« Reply #1 on: November 01, 2017, 11:25:55 AM »

There are rail joiners with wire leads available while you wait.
Logged

Modeling the New Iberia and Northern 1945
Len

View Profile
« Reply #2 on: November 01, 2017, 12:20:36 PM »

There are rail joiners with wire leads available while you wait.

Good luck trying to get the factory joiners off the use them!

Len
Logged

If at first you don't succeed, throw it in the spare parts box.
Warflight

I'll be your Huckle Bearer...


View Profile WWW
« Reply #3 on: November 04, 2017, 01:20:07 AM »

  Getting the factory joiners off is quite simple... though it does require a pair of small pliers. And you will not recover the factory joiner. But the track should be fine, and your wire joiners will fit quite fine.

  Remember, EZ track is code 100 rail.

  If you are handy with a solder iron, you can also make your own wired joiners, using an EZ Command plug. You will need a solder iron, some wire cutters (or strong pair of scissors) some solder (duh?) and the plug from your Bachmann controller (or a replacement plug from the parts store if you don't want to mess with your old plug)

  Remember... you can pretty much do anything with your EZ track that you can do with any other snap track when it comes to wiring.
Logged
Pages: [1] Print 
« previous next »
Jump to:  
Powered by SMF | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!