ONLINE
STORE
"ASK THE BACH MAN"
FORUM
PARTS, SERVICE,
& INFORMATION
CATALOGS AND
BROCHURES

Welcome, Guest. Please login or register.
Did you miss your activation email?
January 20, 2018, 06:23:26 PM
Home Help Search Login Register
News: Check out the photo gallery link above or >click here< to see photos of recently announced products!
+  Bachmann Message Board
|-+  Discussion Boards
| |-+  Williams by Bachmann
| | |-+  Station sounds
« previous next »
Pages: [1] Print
Author Topic: Station sounds  (Read 1334 times)
tfcii

View Profile
« on: January 11, 2009, 10:09:27 AM »

Recently I noticed that on the underframe of my Madison baggage car by Williams that it was written: "wired for station sounds".  I presume that there is some type of sound board that may be available to "plug-in" to the internal wiring of the car.  Please advise if a soundboard is available and where I might purchase or shop for one.  Thanks.
P.S.  This is an O scale car.
« Last Edit: January 11, 2009, 10:11:25 AM by tfcii » Logged
Loco Bill Canelos

Model railroading since 1947


View Profile
« Reply #1 on: January 11, 2009, 08:09:16 PM »

Hi,  I wish I could help but I don't kmow anything about Williams O Scale,  hipefully someone here can help, but if you don't get an answer here try asking the same question on the Williams by Bachmann discussion group lower on the main discussion page. 
Logged

Loco Bill,  Roundhouse Foreman
Colorado & Kansas Railway Missouri Western Railway
Semi Official Historian; Bachmann Large Scale
There are no dumb or stupid questions, just questions!
glennk28

View Profile
« Reply #2 on: January 11, 2009, 10:06:20 PM »

I'd love to have a "sound station" with the old Mel Blanc --Jack Benny Show announcements ending in "Leaving for Anaheim, Azusa, and Cuc-amunga!"--I remember that as a kid--gj
Logged
3rail
Administrator


View Profile
« Reply #3 on: January 12, 2009, 05:40:26 AM »

Hello,

About ten years ago Williams had an optional sound board that was included in some sets.  We were considering doing it again so we included a socket that would allow easy installation.  The project never took off and there are passenger cars that were produced for one year that have this plug and corresponding plate on the bottom.

Regards,
3rail
Logged
Pages: [1] Print 
« previous next »
Jump to:  
Powered by SMF | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!