ONLINE
STORE
"ASK THE BACH MAN"
FORUM
PARTS, SERVICE,
& INFORMATION
CATALOGS AND
BROCHURES

Welcome, Guest. Please login or register.
Did you miss your activation email?
November 23, 2017, 08:56:27 AM
Home Help Search Login Register
News: Please read the Forum Code of Conduct   >>Click Here <<
+  Bachmann Message Board
|-+  Discussion Boards
| |-+  General Discussion
| | |-+  DCC On Board
« previous next »
Pages: [1] Print
Author Topic: DCC On Board  (Read 1222 times)
APIINC

View Profile
« on: March 30, 2009, 09:52:00 AM »

I bought two spectrum sets with DCC On Board, The Frontiersman and the explorer. The DCC controller I have is a MRC Prodigy Advance2., Both Locos are set at address #3 and both respond to this address. I am trying to change the address on one of the Locos so I can run them independently on the same track. I followed MRC's instructions, and can't change the address and Bachmann gives no info on the decoder, so what to do for the answer. Go to Bachmann or MRC for the answer?
Logged
richG
Guest
« Reply #1 on: March 30, 2009, 02:52:25 PM »

I do not have an answer but someone here might. Y

ou might also consider Joining this Yahoo MRC Group that I belong to in case of any future problems. The group is quite active and specializes in MRC products.


http://groups.yahoo.com/group/MRC-DCC/

Rich
Logged
Yampa Bob

Y.V.R.R.


View Profile
« Reply #2 on: March 31, 2009, 01:09:23 AM »

The issue of programming a Bachmann decoder with Prodigy has been previously  discussed on this board.

http://www.bachmanntrains.com/home-usa/board/index.php/topic,1713.msg14686.html#msg14686

Scroll down to the 6th post (by Hunt) see if this helps.

Regards

« Last Edit: March 31, 2009, 01:16:24 AM by Yampa Bob » Logged

I know what I wrote, I don't need a quote
Rule Number One: It's Our Railroad.  Rule Number Two: Refer to Rule Number One.
Pages: [1] Print 
« previous next »
Jump to:  
Powered by SMF | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!