Bachmann Message Board

Discussion Boards => Large => Topic started by: Ron Tremblay on August 22, 2011, 03:51:59 PM



Title: Forney speaker?
Post by: Ron Tremblay on August 22, 2011, 03:51:59 PM
 
How do you install the 3" speaker? Is it pnp or do you solder  it?                                                                                                                                                       


 Regards,Ron

                                                                                                                                                                                           


Title: Re: Forney speaker?
Post by: Loco Bill Canelos on August 22, 2011, 07:11:51 PM
Many speakers have leads installed which are idetifiied as Plus & minus, If yours has leads they usually installed into a sound board with screw tabs and all you have to do is screw them in.   If there are no leads on the speaker, you will have to solder the leads to the Tabs provided on the speaker first, then run the leads to the sound board.


Title: Re: Forney speaker?
Post by: Ron Tremblay on August 23, 2011, 06:01:36 AM

 Thank you, Loco Bill                                                                                                                               


 Regards, Ron