Bachmann Online Forum

Discussion Boards => Large => Topic started by: CCSII on February 14, 2007, 12:16:26 PM

Title: Connie Decoder Install
Post by: CCSII on February 14, 2007, 12:16:26 PM
OK-

So I get my Connie and I get my DCC decoder and I go to:http://www.bachmanntrains.com/home-usa/board/read.php?f=1&i=142566&t=75203

No thread! No help!! Where did it go!!!

Does anyone (Currmudgeon?) have that thread saved who might be willing to share?

Please?

Charley

Chicamauga & Sequatchie RR "The Route of the Loon"
Title: Re: Connie Decoder Install
Post by: Tim Brien on February 14, 2007, 04:08:53 PM
Charley,
            Not the link that you were after,  but here is one from MLS.

http://www.mylargescale.com/forum/topic.asp?TOPIC_ID=31809
Title: Re: Connie Decoder Install
Post by: CCSII on February 14, 2007, 04:30:46 PM
Thanks Tim, that helps a lot!
Title: Re: Connie Decoder Install
Post by: wedressler on February 14, 2007, 05:51:57 PM
Make sure you remove the capacitors on the motor. If not you can blow the Decoder.  A St Albins installer didn't know that and we went back and forth for 2 years.!!!!
I Don't use that insaller anymore and take my own chances