I bought he Acela set. Put it on the tracks, using the EZ Command DCC power source. The Acela won't run, whereas all other engines do run on the same track. I've followed all instructions to the letter. Am I missing something? Or should I return the set?
If it is dcc (decoder equipped), look for a switch on the roof. It switches from pantograph to track power. Many sets came from the factory set to run pantograph.
Also, check for a decoder. Most sets came DCC ready without a decoder.
Regards,
Jonathan
It is most likely one of the things that Jonathan mentioned, so you don't need to return the set.
I had already checked the switch you mention. Makes no difference which position it's in. Engine won't run on #3 or DC only.
Looking to see if set is DCC ready or on board. Says DCC on board.
Visually verify that the locomotive actually has a decoder inside and that no wires are loose or frayed. Try doing a factory reset if it does have a decoder and everything appears to be in order.
Wow! Not a pro here. How do I do a factory reset? Taking it apart and knowing what I'm looking for seems daunting. Shouldn't the seller be responsible for a working products/
Quote from: Gold Star on April 30, 2017, 04:13:39 PM
Wow! Not a pro here. How do I do a factory reset? Taking it apart and knowing what I'm looking for seems daunting. Shouldn't the seller be responsible for a working products
Your product could very well be working but you just don't realize it. Program CV 8 to a value of 8 to do a factory reset. If you show us a picture with the shell removed we can tell you if your locomotive has a DCC decoder or just has an 8 pin socket.
What is CV 8? I don't follow your reset instructions. Thanks.
CV is Configuration Variable, you need to program CV number eight to a value of eight to do a factory reset on the decoder, this is the case for all basic Bachmann factory supplied decoders (non sound). All you need to do is select to program either on the main or the service track, it doesn't matter and type in 8 when it prompts you for a CV number and then type in 8 when it prompts you for a value.
Thanks for the effort, but this is way above my pay grade. I searched for some instruction on how to change the CV, but nowhere did I find an explanation beyond connecting your computer to the DCC. No one explains how to do that!
They sold me a train that doesn't run for whatever reason, period. I'm returning the set.
To Gold Star : Your EZ Command is a basic DCC controller it has no facilities to Change CV s . It is time for you to get information about the systems you are trying to control . Also EZ command does not allow a computer to access your controller what so ever . Sorry about your lack of experience with technology .
John2.
You might want to contact the Bachmann service department - they may be able to help.
http://www.bachmanntrains.com/home-usa/service.php