Bachmann Online Forum

Discussion Boards => Large => Topic started by: terryl on June 13, 2017, 02:31:50 PM

Title: 4-6-0 Anniversary Edition Cab LED light
Post by: terryl on June 13, 2017, 02:31:50 PM
I would like to install a LED light in the Cab of my 4-6-0 Anniversary Edition Steam Engine.
Bachmann parts does not show any part for this. I can purchase a LED light and resistor,
but haven't found a ceiling mount to install it. I'm sure their new engines are equipped with one.

Terryl
Title: Re: 4-6-0 Anniversary Edition Cab LED light
Post by: Loco Bill Canelos on June 13, 2017, 04:36:56 PM
Hi Terrryl,

The reason there is no part is that the Annies even  the newer one were never produced with a cab light.  I f you want one you will have to fabricate your own mount and wire in the led yourself.  You could either wire the led to the center posts on the front boiler switch, or run the wires up from the wipers under the bottom plate. 

Have fun.

Loco Bill