Hello all. I am having a problem with my new K-27. ( :( ) When I put the locomotive on the track, it powers up, and makes all the sounds it should in neutral. But when I press a function key, or move the throttle I get nothing. I tried changing the address, and I successfully did it. (The motor pulsed and the loco moved a bit) But I still get nothing out of it. Any help is really, really appreciated!!!
seems something wrong with the decoder
or your just hitting the throttle on the wrong frequency, which i assume your not... well...
if it moved with the switch of the adress then the motors fine...
something in the chips
maybe someone else could give you a more complicated and detailed answer :P