Bachmann Online Forum

Discussion Boards => HO => Topic started by: railhobo on February 07, 2008, 08:24:25 PM

Title: bachmann ez command system help.
Post by: railhobo on February 07, 2008, 08:24:25 PM
i have a bachmann ez command control with bachmann ez track. the track was originally set up for dc operation. i have two turnouts in the lay out. can these be hooked up to the new dcc control and if so how..
Title: Re: bachmann ez command system help.
Post by: the Bach-man on February 07, 2008, 09:58:31 PM
Dear Hobo,
You'll have to keep your analog controller to use the AC terminals for turnout power.
Have fun!
the Bach-man
Title: Re: bachmann ez command system help.
Post by: JAS on February 07, 2008, 10:32:58 PM
You can use the DC turnouts with your DCC command unit, you just have to use a separate 12 volt ac power supply, or use the assessory connection on your old controller for the switches.

Alternately, you can replace the switches with Bachmann DCC switches, which don't need ac power, just connect the switches and use the DCC controller to switch them.
JAS
Title: Re: bachmann ez command system help.
Post by: railhobo on February 09, 2008, 06:41:21 PM
thanks for the help..
Title: Re: bachmann ez command system help.
Post by: CHUG on February 09, 2008, 11:26:09 PM
hobo whats the new dcc control. Thanks
Title: Re: bachmann ez command system help.
Post by: railhobo on February 10, 2008, 11:05:34 AM
bachmann e-z command digital command control system.