ONLINE
STORE
"ASK THE BACH MAN"
FORUM
PARTS, SERVICE,
& INFORMATION
CATALOGS AND
BROCHURES

Welcome, Guest. Please login or register.
Did you miss your activation email?
November 22, 2017, 12:23:19 PM
Home Help Search Login Register
News: Please read the Forum Code of Conduct   >>Click Here <<
  Show Posts
Pages: [1]
1  Discussion Boards / HO / Re: Bachmann PCC trolley with sparking trolley pole on: November 01, 2017, 08:08:08 PM
After much trial and error, here are the settings:

CV112 = 1:  Activates the air compressor as background noise

F4:  toggles between spark and no spark on the pantograph
2  Discussion Boards / HO / Re: Bachmann PCC trolley with sparking trolley pole on: October 01, 2017, 04:02:03 PM
I continue to have issues with CV 52.  What is value for CV 52 that enables sound sychronized with the sparking?
3  Discussion Boards / HO / Re: Bachmann PCC trolley with sparking trolley pole on: September 28, 2017, 01:33:18 PM
Many thanks.  What value should I enter for CV 52?

Also, thanks for the clarification on the traction motors.  The marketing materials for the trolley do mention traction motor sounds.

4  Discussion Boards / HO / Re: Bachmann PCC trolley with sparking trolley pole on: September 28, 2017, 11:44:08 AM
Maybe I can shed more clarity:

-The function buttons come pre-configured per the PDF.
-I had to configure the PCC to activate the "background noise" air compressor (this was done via trial and error).
-I can't find the CV and CV value for "traction motor" and "sparking trolley pole".

Any help would be greatly appreciated!

-Dan
5  Discussion Boards / HO / Re: Bachmann PCC trolley with sparking trolley pole on: September 28, 2017, 08:51:30 AM
Thanks for the quick response.  Yes, I have the PDF document, but it does not list the CV mappings (i.e., CV 198:  Value one is for bell, Value 2 is bell + whistle, etc.

Thanks,

Dan
6  Discussion Boards / HO / Bachmann PCC trolley with sparking trolley pole on: September 27, 2017, 07:47:33 PM
Hello - I recently purchased a PCC Trolley from Bachmann.  The factory DCC card was not enabled for compressor or traction motor.  After programing the DCC, I was able to turn "on" the compressor, but not the traction motor.  I also seem to have disabled the sparking pole.

Can anyone shed some light on how the CVs should be configured?

Many thanks,
Dan
Pages: [1]
Powered by SMF | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!