ONLINE
STORE
"ASK THE BACH MAN"
FORUM
PARTS, SERVICE,
& INFORMATION
CATALOGS AND
BROCHURES

Welcome, Guest. Please login or register.
Did you miss your activation email?
November 19, 2017, 03:50:04 PM
Home Help Search Login Register
News: Check out the photo gallery link above or >click here< to see photos of recently announced products!
  Show Posts
Pages: [1]
1  Discussion Boards / General Discussion / Re: E-Z Track Over-Under Figure 8 Track Pack - HO Scale on: November 11, 2017, 07:22:36 PM
Thanks again, Jeffery.  I checked on the bridge but it simply replaces a straight section so unless I replace two straights with two curves like you suggest the bridge merely adds another interesting element with the flashing light.  As I'm using this in an Operation Lifesaver display I just might add the bridge and the replacement of two sections of straight for curved.  Tom
2  Discussion Boards / General Discussion / Re: E-Z Track Over-Under Figure 8 Track Pack - HO Scale on: November 11, 2017, 06:58:24 PM
Thanks, Jeffery.  If I add two 18"radius curve sections in place of two straight sections won't that through off the figure 8 setup and force the track not to setup properly?  I like the bridge option better and I believe that Bachman has such a bridge that works with the E-Z track.  Tom
3  Discussion Boards / General Discussion / E-Z Track Over-Under Figure 8 Track Pack - HO Scale on: November 10, 2017, 08:56:26 PM
I just purchased the above Bachman Track Pack but can't seem to set up the piers where they are supposed to go according to the photo on the box.  The photo on the box shows a straight piece of track supported on piers on either side of the lower track.  However, when I set it up the straight track connection on the upper piece is directly over the lower track and I can't put a pier directly under the connection.  I have to slide it back on either side resulting in a situation of an unsupported connection that dips down when a train runs over it.  Any ideas on what I'm doing wrong setting this up?  It came with 19 pieces of 18" radius curved track and 1 piece of 18" radius curved section that has a terminal and rerailer on it.  It also came with 4 9" straight pieces of track which I assume forms the "x" where the two circles come together with the over-under.   
Pages: [1]
Powered by SMF | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!