ONLINE
STORE
"ASK THE BACH MAN"
FORUM
PARTS, SERVICE,
& INFORMATION
ORDER A
CATALOG

Welcome, Guest. Please login or register.
Did you miss your activation email?
October 25, 2014, 01:38:02 PM
Home Help Search Login Register Gallery
News: Check out the photo gallery link above or >click here< to see photos of recently announced products!
+  Bachmann Message Board
|-+  Discussion Boards
| |-+  On30
| | |-+  Bachmann On30 minimum radius? Maximum grade capability?
« previous next »
Pages: [1] Print
Author Topic: Bachmann On30 minimum radius? Maximum grade capability?  (Read 1168 times)
vic


View Profile
« on: October 01, 2009, 10:52:18 AM »

Bachmann On30 minimum radius? Maximum grade capability?

Question re: Bachmann On30 lineup, what are the real world minimum turning radius of thier lineup particular

4-6-0 Ten Wheeler

2-8-0 Connie

2-4-4 Forney

I have a plan in mind but while most of it is 18" radius, in one section it calls for a minimum radius of 15"

I already found the posts here re the Porter, 2-6-0 and rolling stock items min radius, so I'm primariliy concerned about the newest offerings. So I need to find which will work, also I will have a working grade of 4% so I need to know also if they are capable of working the grade as well.

I'm particularly interested in the 2-6-0 on a 4% grade, 18" R, typical consist would be either engine, tender, and 2 0r 3 passenger cars, or engine, tender, 3-4 freight cars and caboose. not long trains but then my passing sidings arent long either. the whole layout will be pretty small but I plan to take it as vertical as I can.

Thanks
Logged
NarrowMinded


View Profile
« Reply #1 on: October 01, 2009, 12:30:00 PM »

I have seen this subject come up a lot, and recently, there are generally a lot of variables people ask about or mention, but the one thing that all the replies seem to agree on, is you should set up a section of test track with the min radius and grade to test operation of your equipment, and run them at the max speed you would run them, to make sure they run smoothly. it might seem like a hassle but stripping track off of a blank piece of plywood is easier the redoing your bench work.

NM
Logged
mabloodhound


View Profile WWW
« Reply #2 on: October 01, 2009, 01:20:13 PM »

On one of the other forums, it was posted that the Forney requires at least a 21" minimum.   Can't help on the others.
Logged

Dave Mason

D&G RR (Dunstead & Granford) in On30
 “In matters of style, swim with the current;
 in matters of principle, stand like a rock.”   Thos. Jefferson

The 2nd Amendment, America’s 1st Homeland Security
ebtbob


View Profile WWW
« Reply #3 on: October 01, 2009, 01:57:23 PM »

Good Afternoon,

        The 4-6-0,  the 2-8-0,  and the 2-6-0 will all take 18 in radius.  The 2-6-0 may take 15 in radius,  but if so,  that will be the only one.
        The forneys and the climaxs will need 21-22 in radius as I have a passing siding with 18r in one of my mine areas and the climax will not go without derailing.
Logged

Bob Rule, Jr.
Hatboro, Pa
In God We Trust
Not so much in Congress
GATSME MRRC - www.gatsme.org
vic


View Profile
« Reply #4 on: October 01, 2009, 02:52:07 PM »

OK so I could only take the Mogul and the Porters on the upper 15"R loop, the rest would be OK on the lower 18"R loop but would choke on the upper.

I ask these Qs as I'm considering scrapping my current layout and switching to On30, but the caviet is that I have to keep my current benchwork base which is only 4'6" x 6'6". I have no other room to expand it.

I have what I consider a workable plan but I havent bought anything yet so hence my questions, I need to know with some certainty this will work. if I cannot make this idea work on this base, I wont do it.

So how do these work on grades? Huh?
Logged
vic


View Profile
« Reply #5 on: October 02, 2009, 02:32:13 PM »

So how do the 2-6-0s work on grades?  Huh?

Anyone anyone?

Bueller Bueller?
Logged
bob39520

View Profile
« Reply #6 on: October 03, 2009, 02:27:48 PM »

Check out http://www.pacificcoastairlinerr.com/of_280/ 

He runs an On30 2-8-0 on 15" radius w/no problems.
For those real tight curves there is always the turntable!
Logged

Pelahatchie Bob
El Loco
Guest
« Reply #7 on: October 04, 2009, 07:55:45 AM »

I have 4% grades, I have ran the 2-6-0 Mogul with 3 Bachmann  passengers cars and it did  just fine.  The Connie pulls the grade like a champ with a long drag behind her.  Also Keeping in mind my 4% grade as it makes a loop with a 22" radius  on my RR it also  increases the gradient. They all pull  the grade just fine.   The Shay, No sweat.  The Porter , as long as the drag is light and you weight the Porter's chassis  a little for traction she'll pull my 4% OK  .
Hope this helps.  Smiley
« Last Edit: October 04, 2009, 07:59:40 AM by El Loco » Logged
renniks


View Profile
« Reply #8 on: October 04, 2009, 08:53:53 AM »

Vic

Some folks are running Climax locos on 18"r. The Forney will run but have trouble pulling stock due to excessive rear coupler swing.
If you are prepared to do some 'bashing' there are other possibilities which will run on 15" radius or less.
You could use an HO 4-axle diesel chassis with a BVM conversion kit or a scratch built boxcab body;or use a  Bachmann (soon to be reintroduced) HO 0-6-0 ST switcher with a BWM kit.

Eric UK
Logged
vic


View Profile
« Reply #9 on: October 04, 2009, 09:48:35 PM »

Thanks guys thats what I was hoping to hear, now I can keep planning  Grin
Logged
Pages: [1] Print 
« previous next »
Jump to:  
Powered by SMF | SMF © 2014, Simple Machines Valid XHTML 1.0! Valid CSS!