News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu

2-6-6-2T logging g scale loco

Started by willis, March 11, 2010, 07:41:05 PM

Previous topic - Next topic

willis

hi, i just bought this loco, i am installing or trying to put in a QSI G/O decoder.
the engine has 2 chuff optical sensors, the engine board has a 2 screw connector that says chuff input + and- the QSI board has chuff/cam out with 3 pin connector ground-1, cam-2, and +5-3. it shows make and break 1 and 2. how can that be done?
also the engine board has 2 speaker wires coming out of it to hook to the speaker but the QSI also has speaker out connector. (scratching my head on these 2 issues).
please help, someone, anyone!
thanks, willis.

willis

sorry, can someone please move this to large scale, don't know how to do it
thanks, i don't want to have to re write the post allover again.
willis.

Jim Banner

Easiest way to move your post is to copy and paste it into a new post on the large scale board.  Then come back and delete your topic from this board.

Jim
Growing older is mandatory but growing up is optional.

willis

copy and paste?  don't know how.
willis

willis

#4
thanks narrow minded, i am 64 and just started using computer.
you said left button then release right button?
not being a smart ***, just don't know.
thanks, willis.

willis

thank you Mr. Lynch for moving this post for me.
willis.

Joe Satnik

#6
NM,

Check your drag instructions, I think you meant "release the left mouse button".  (I'll delete this note later.)   

Dear All,

For highlighted text, I use these short cuts:

Ctrl-c to copy (to memory),

Ctrl-v to paste (from memory),

Delete to delete (highlighted text).

I am not used to using:

Ctrl-x to cut (to memory),  I guess it could come in handy.

Use the Ctrl key as you would the Shift key.

Hope this helps.

Sincerely,

Joe Satnik

Edit: grammar



If your loco is too heavy to lift, you'd better be able to ride in, on or behind it.

willis

thanks Joe and Narrow Minded,
i can mess things up even when told the correct way.
willis.

willis

i got an answer to the speaker question, but still need help for the chuff problem.
anyone ? please help. Bachmann???
willis.