News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu

Connie

Started by kettle valley, January 09, 2011, 08:48:30 PM

Previous topic - Next topic

kettle valley

I just bought a NOS Connie on Ebay. It came with the infamous tender truck breakage. I tryed the longer screw method to fix them but where they are broke does not fix the problem. What I really need is a glue to fix the broke parts. Tried CA and plastic model cement but no luck.
PS also came with the broken gear as well!

Kevin Strong

There's a surgical solution that involves a little work with a razor saw, but it's not difficult. I've got photos of the process, but I'm away from my home computer at the moment. I'll post them in a few days.

Later,

K

Sleeping Bear

   Permatex makes a two part 2 ton epoxy for plastic. Get it at a auto parts store.  it sets up very hard and can be drilled and tapped if need be. Just an Idea.....Later all S.B.
"If at first you don't succeed....Get a bigger hammer"

Old John

You could try Methyl Ethyl Ketone, MEK, available at paint and car parts stores.


JerryB

Just get a replacement set of trucks from Bachmann. The new ones will have a much better life.

I am an adhesives specialist, and can tell you that there is no commercially available adhesive that will permanently join the plastic used in Bachmann's trucks. Some appear to work, but all will fail within a short time.

Happy RRing,

Jerry
Sequoia Pacific RR in 1:20 / 70.6mm
Boonville Light & Power Co. in 1:20 / 45mm
Navarro Engineering & Construction Co. in 1:20 / 32mm
NMRA Life Member #3370
Member: Bay Area Electric Railway Association
Member: Society for the Preservation of Carter Railroad Resources

Mik

Quote from: kettle valley on January 09, 2011, 08:48:30 PM
I just bought a NOS Connie on Ebay......
PS also came with the broken gear as well!

Welcome to the 'club'... Best help I can offer you on that is a tutorial...
http://www.the-ashpit.com/mik/gear.html

BTW, You could always toss the tender trucks an get Accucraft ones... bit spendy, but they won't break
Mik

Loco Bill Canelos

I used 5 minute epoxy, 5 years ago and it is still going strong!!

Loco Bill,  Roundhouse Foreman
Colorado & Kansas Railway-Missouri Western Railway
Official Historian; Bachmann Large Scale
Colorado RR Museum-Brakeman-Engineer-Motorman-Trainman
There are no dumb or stupid questions, just questions!