News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu

0-4-2 Porter light direction

Started by Chris G, January 17, 2012, 09:55:56 PM

Previous topic - Next topic

Chris G

Hello all,
After 18 months deliberation I have hardwired a Locksound decoder into my Porter.
Replace cab with Banta all weather model.
Sound projected out thru floor.
Covered decoder and speaker with Banta floor provided.
Head room is a bit low but not noticeable.
Improved pick up by adding a slider between drivers as well as usual pick up off driver rears.
Painted black its not to noticeable but does job well.

Problem Light comes on when in reverse.
Changing direction in Locsound makes no difference.
Do I just reverse wires to light ?
( looking for easy answer )
:-\
Thanks Chris

ChrisS


Chris G


NarrowMinded

I think the other Chris was Joking, or is thinking the plug is backwards but you don't have a plug

I think you need to switch the wires on the motor.

The Common "Blue" does not Change polarity with the direction of the motor/decoder so if you just switch the LED wires around you will end up with no light. 

or if your decoder has a white and a yellow wire which ever one you have connected to the head light, disconnect it and connect the other,

NM-Jeff

Chris G

Jeff,
Makes sense will give it a go.
Thanks for response.

NarrowMinded

Your welcome Chris.

Let me know how it turns out.

NM-Jeff