News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu

Side dump cars 92502

Started by mickeykelley, February 09, 2013, 11:21:25 AM

Previous topic - Next topic

mickeykelley

I have 3 of the green side dump cars that have plastic wheels.  First of all, what era are these modeled after?  Second, will the regular bachmann metal wheels work on these?  As I understand the new ones are only brown and do have metal wheels, but are the green ones still available other than eBay?  I would like to have them all match color.

JerryB

I'm not ceratain, but think the prototype cars were from the early 1900s.

Take a look at Sierra Valley Enterprises detailing kits for these models:

http://www.sierravalleyenterprises.com/bach_ore_cars.html

The kits include metal wheelsets along with a choice of couplers and several replacement and added detail parts that really improve both the appearance and operation of the cars.

Happy RRing,

Jerry
Sequoia Pacific RR in 1:20 / 70.6mm
Boonville Light & Power Co. in 1:20 / 45mm
Navarro Engineering & Construction Co. in 1:20 / 32mm
NMRA Life Member #3370
Member: Bay Area Electric Railway Association
Member: Society for the Preservation of Carter Railroad Resources

mickeykelley

Very interesting. Will bookmark. Thanks

mickeykelley

Which metal wheels from Bachmann are the correct ones for replacing the plastic?

Loco Bill Canelos

Hi Mickey,

I believe you will need the 24.5 MM metal wheels which are Bachmann Item number 92422.  Before you order measure your plastic wheels to see if the are 24.5mm just to be sure.  My dump cars are in deep storage so I can't be absolutely sure.

Bill
Loco Bill,  Roundhouse Foreman
Colorado & Kansas Railway-Missouri Western Railway
Official Historian; Bachmann Large Scale
Colorado RR Museum-Brakeman-Engineer-Motorman-Trainman
There are no dumb or stupid questions, just questions!

NarrowMinded

loco you are correct they are the 24.5 wheels

NM-Jeff

mickeykelley

When I measure, do I include flange too or just rolling contact area?

ricnpat

Mickey,

Depends on what your trying to do but Gary Watkins (Sierra Valley Enterprises) used to make a fine scale conversion kit for those early (plastic frame) side dumpers. 
Just checked his web site and he still has them listed, might want to give them a look.

http://www.sierravalleyenterprises.com/bach_ore_cars.html

Good luck
Rick

NarrowMinded

Hi, they are measured on the area that makes contact with the track.

Please note that the tread is tapered and will usually measure 24.5mm at the smallest part and larger near the flange

NM-Jeff

mickeykelley

Are the new ones different other than metal wheels and brown/black color?  Frames metal?