News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu

track

Started by mallonee, February 09, 2013, 11:05:26 AM

Previous topic - Next topic

Joe Satnik

B,

Taking a closer look, I see two S curves in upper left hand corner. 

One fix would be to replace the 4 middle curves with straights. 

You could replace the two short stubbed turnouts (near TT-8 and Tower-7) with curves,

or curves made from flex track.  You would save the expense of 2 turnouts.   

Hope this helps. 

Sincerely,

Joe Satnik
If your loco is too heavy to lift, you'd better be able to ride in, on or behind it.

jbrock27

Thank you for the tips Joe.

I have stayed away from using flex track bc I get concerned I would try to make the radius too tight in spots.  So far, I have been using sectional "snap track".
Keep Calm and Carry On