News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu

DCC Sound on board

Started by Mr. C, April 20, 2013, 12:43:19 PM

Previous topic - Next topic

Mr. C

I have just purchased a Bachmann Alco FB2 Diesel Loco With Sound.
When I put it on the track it runs,but no sound.I am using the e-z command system.I pushed the function button along with #10,however nothing happens. Any ideas?

jward

the sound is most likely muted. follow your command station's instructions for unmuting the sound. can ez command do this? the literature in the loco box says function 8 in mute.
Jeffery S Ward Sr
Pittsburgh, PA

Jerrys HO

Mr.C

After hitting the function button try pressing other numbers. 10 is for the lights,8 or 6 mutes, 1,2,3 are for the horns and bells. Most of the rest do nothing.

Jerry

Mr. C

I did try the other buttons,however they are not function buttons on the ez command box.When I do push them,nothing happens.

Jerrys HO

C
Don't take this wrong, just trying to help. After you select the loco's address and then press the function button, does the light next to the address blink? When it's blinking is when you can operate the sounds. Just a thought.

Jerry

keystone

The Engine sound on my E Z command is at 4. Has to be turned on by the blinking address button using function.