News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu

Track Pins

Started by Fxguy1, January 19, 2015, 08:31:27 PM

Previous topic - Next topic

Jhanecker2

fxguy :  when you get the mating parts properly aligned    and fastened  dowel the mating sections but don't  glue the dowels in . This  should allow you to reconnect the sections more easily . John2

jbrock27

W/o a pilot hole, track spikes will bend once they hit the 2nd layer of the "sandwich" of a piece of plywood.
Keep Calm and Carry On

Fxguy1

After much advice on here I decided to use adhesive caulk instead of the pins.

Danboone

Was going to nail mine but I used hot glue on my EZ track and it has worked out pretty good. 

Just be careful around the turnouts  ;)