News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu

Screw in dynamis power out

Started by Vizzin72, November 19, 2015, 12:29:51 PM

Previous topic - Next topic

Vizzin72

I have Bachmann dynamis with an ho EZ track layout.  I want to run two more terminal rerailers to add power to the existing single rerailer.  I have read previous posts about splicing wires from one rerailer to the next etc etc .... My question is .... Instead or splicing wires, can I just run my 10 foot extensions back to the control and plug multiple sets of wires in to the optional screw in adapter at the power to track out (obviously not the 3.5 mm outlet )

Thanks

Hunt

Do not try to fit multiple wires into each side of the Dynamis included plug with screw terminal connector.

Connect leads from the Dynamis plug with screw terminal connector to either a Dual Row Terminal or  Block Euro Style Nylon Barrier Strip (or the like). From that, connect the leads to the terminal rerailers or solder them to track.

Vizzin72

Dual row terminal ? Like something from radio shack ?