News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu

2-6-6-2 Problem

Started by Peter Webster, January 29, 2016, 04:41:45 AM

Previous topic - Next topic

Peter Webster

     My 2-6-6-2 died last night. After I ran it fine yesterday I packed it back in it's box then today getting it out I found that it just sits on the track. no sound, no movement.
Does anyone have any ideas on what I could do and is this typical of this loco.
My 2-4-4-2 runs like a charm!
HELP
Peter Webster

ebtnut

My first suspicion would be that one of the wires from the tender to the loco has broken. 

Peter Webster

That was the first thing I checked and all are seemingly ok.
I will try it out today on JMRI and see if that can pick up any problem.

dutchbuilder

Must be the one of the two connectors or the pcb they are soldered to.
These connectors are not made to be disconnected every time.
Something will break.
So next time take it out of the box , connect the tender to the locomotive and leave it there.

Ton

Peter Webster

I have checked all wiring connections and they seem ok. I hooked the loco up to my 4-6-0 tender and it ran without any problem but looked ridiculous so I tried the 2-4-4-2 tender but to no avail. I'm taking it to a specialist repair shop next week and I will let you know. My thoughts are to the sound board.