News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu

EZAPP

Started by drhenze, July 09, 2016, 09:14:44 PM

Previous topic - Next topic

drhenze

I have 2 ezapp locos they tend to stop for no reason then have to be restarted

Bucksco

Hard to make a diagnosis without more info but it sounds like an interruption in power - check your track and wiring.

railtwister

Quote from: drhenze on July 09, 2016, 09:14:44 PM
I have 2 ezapp locos they tend to stop for no reason then have to be restarted

I also have two E-Z App locos, and they have stopped on rare occasions, but only when going at a very slow speed and usually when the track needs cleaning. Usually, turning the throttle to zero, and then cranking it back up to the desired speed does the trick for my engines. Have you updated your boards software to the current version? Do your locos both stop in the same locations on the layout? Check all your rail joiners to make sure they are tight and providing good continuity, plus make sure the loco's wheels are clean.

Bill in FtL

Grapevine Flyer

Are you using Android or iOS?