News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu

DCC Turnouts

Started by GFV, November 10, 2017, 06:52:52 PM

Previous topic - Next topic

GFV

Would it be possible to purchase just the decoders that come installed in the DCC Turnouts (left or right) so that I can convert my older remote turnouts to DCC.

Len

If they are not available from Bachmann, I would suggest using either the Digitrax DS52 or DS64 stationary decoders.

The DS52 controls 1 or 2 turnouts:
http://www.digitrax.com/products/stationary-decoders/ds52/

The DS64 controls up to 4 turnouts:
http://www.digitrax.com/products/stationary-decoders/ds64/

Both can control either dual solanoid switch motors, or slow motion type switch motors. If you have both types on your layout, you'll need a seperate decoder to each type.

Len
If at first you don't succeed, throw it in the spare parts box.