News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu

Weights for tank cars

Started by AHRJMR, November 18, 2017, 12:34:36 PM

Previous topic - Next topic

AHRJMR

I purchased a Bachmann Silver Series 40' Dome Tank Car Item 17134 (Shell), Does anyone know how to add weight to the car?
Thanks! :)

Len

I drill a hole just large enough for a BB to get through, then squirt in some white glue and dump the appropriate weight of BB's in. Slosh things around a bit to coat the BB's in glue, plug the hole with a bit of styrene, and sit upright overnight.

Len
If at first you don't succeed, throw it in the spare parts box.

AHRJMR


jward

Or, you could carefully disassemble the car itself. The tank fits over a bottom part that looks like a saddle. You could pour the glue and bb mixture into the saddle and let it dry. Or you could do like I did and glue about 5 pennies vertically at each end of the saddle. I had posted photos of how I did this several years back, but I can't seem to find the post.
Jeffery S Ward Sr
Pittsburgh, PA

Piyer

I prefer craft store sand or fine ballast, and not to glue it down. It's easier to get an even weight distribution, and it makes life simple if you need to add or remove weight later.
~AJ Kleipass~
Proto-freelance modeling the Tri-State System c.1942
The layout is based upon the operations of the Delaware Valley Railway,
the New York, Susquehanna & Western, the Wilkes-Barre & Eastern,
the Middletown & Unionville, and the New York, Ontario & Western.