News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu

Three Truck Shay Firebox Light

Started by 1benson1, March 03, 2007, 09:04:07 PM

Previous topic - Next topic

1benson1

Thanks to the help provided here by John Loesch, I installed a TCS decoder in the tender of my new #81901 3 Truck Shay. I'd like to program the firebox light to flicker. Any suggestions on CV settings?

And by the way, the TCS DP5X is a true "plug and play" - no wires to solder, no resistors to install to protect from blown lights (they're built into the decoder). Only 20 minutes from start to running - neat!

Rick
Rick

FFJOHNL312

Rick:
So far as I know, the firebox light is 'hard wired' so that is just stays on and is not controlled by a function output. You will have to seperate the light and wire it up to its own function output. This requires disassembly of the locomotive, which can be found at

http://www.all-model-railroading.co.uk/forum/showthread.php?p=61179

You will need to get some fine wire; TCS sells 32 gauge wire through their website, or, you LHS may have some by Walthers or NWSL.

Best of luck,
John Loesch
DGLE? We don't need no stinkin' DGLE!

1benson1

Thanks John. After looking at the web site, I think I'll enjoy a non-flickering firebox!

Thanks again for your help,

Rick
Rick