News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu

2-4-2 Loco 91114 Pensy Smoke

Started by granpab, February 16, 2009, 12:22:10 PM

Previous topic - Next topic

granpab

I read, on another thread, that this loco is less than Bachmann's Best - just after I bought one new (old stock).  I am very happy with its looks.

Before its initial test run, I tried to make sure the smoke unit was turned off.  But . . . the switch is not marked off-on.   To turn the smoke unit off -- do I move the switch toward the smoke-box-hatch hinges?

Thanks for the help!

PS - regarding the tender wheels -- this one has plastic (which I want to switch to metal)

Joe Satnik

Dear Grandpab,

Disconnect the power pack from the track and hook up an ohm-meter, one probe on one rail, the other probe on the other rail, meter range set to lowest setting.

With the engine on the track, read the resistance, which should be about 10 ohms. 

Turning the smoker on should cause the resistance to drop about 1 ohm.   

Turning the smoker off should cause the resistance to increase about 1 ohm.

Mark the switch.

Let us know if it works.  More advice if it doesn't.

Hope this helps.

Sincerely,

Joe Satnik
If your loco is too heavy to lift, you'd better be able to ride in, on or behind it.

granpab

Thanks Joe.  Sometimes I miss the obvious - until some tells me!