News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu

More logging theme cars, buildings ect needed.

Started by jdmike, December 01, 2010, 07:21:08 PM

Previous topic - Next topic

jdmike

How about some HO versions of the "camp" cars that Bachmann did in On30?   They could be sold seperatly or in a compelte set.   Bachmann has done the motive power, has a logging flat car and car if you want to haul the tourists.  But we need some proper camp cars for the loggers, affordable skelleton style log cars.  The flats are nice, a bit over priced IMHO for what you get.   Rivarossi used to do a nice plastic one, Kaydee still does but also higher priced and a kit that many modelers might not care to attempt.  The Skel log cars plus the bobber caboose would make the perfect train for the Shay or Climax engines!   How about structures, a nice small sawmill designed to put next to a log pond, one that would fit the average home layout and not the huge variety.  How about an unloading "jill poke" to go next to the track and some skidding donkeys to put at the log loading area and out in the woods.   Logging is the prefect small layout prototype when money is tight in the train budget.  Most logging RR's had only a couple of engines, a small sawmill and a few log skels or disconnect style trucks to haul the logs.   A small back woods engine house that is long enough to house the 3 truck Shay or Climax would also be an awsome add on sale.   Bachmann could offer a whole logging series that doesnt require the modeler to deal with craftsman style kits that make up the bulk of the logging theme buildings on the market that work on a small layout.  HO versions of all the logging items in the On30 line up would be a good start.  Walthers did a sawmill series, but it was more modern and took quite a large layout to deal with the size of the structures.   How about it Bachmann?

jward

do you know about the kits from BTS? they have almost everything you'd need to model a logging railroad including the camp cars......

http://www.btsrr.com
Jeffery S Ward Sr
Pittsburgh, PA

jdmike

But you have to want to deal with those type of kits.  Most of todays average modelers would rather not have to do that.  I was just thinking it would make great add on sales for Bachmann and excellent follow up items to their logging locomotives in HO scale, much like they have done in On30.   I will say it seems the rush on the On30 stuff seems to have died off around here.  Most stuff I see at shows and in shops isnt selling. I hope that nice scale isnt a passing fad.  Mike

JDLX

Maybe twelve years ago Walthers ran a "Trees & Trains" series that included a modest sized sawmill, a planing mill, a lumber yard, a paper mill, log cars, woodchip cars, centerbeams, a book, and some other items.  The log cars were based on Milwaukee road prototypes; the woodchip and centerbeam cars were modern; and the sawmill buildings could fit in most eras, though it would be most appropriate for more recent layouts.  Most of these kits have been long discontinued, though a few have been re-issued a time or two, and most can be found at swap meets.  Walthers also did a "backwoods enginehouse" that has been long out of production but does closely represent something that would be found on a logging railroad.

I would second the motion for rolling stock such as camp cars, but I'd like to see other cars made available too, such as the Loggers Special ballast hoppers produced by Rogers and others that were used extensively in the woods, 20- to 25-ton steam powered Brownhoist or Ohio cranes, fire and water cars, etc. 

In my opinion, what is really missing from the HO scale market is a Baldwin logging mikado of the 70- to 90-ton wight range.  A lot of these saw service in the western woods- in a lot of areas, they were more prevalent than the geared locomotives everyone loves- but they have only been made available in five or six brass versions, all 70-ton models.  I'd like to see these before anything else. 

Lastly, one thing to keep in mind is that very few of the sawmills that you see built on your "typical" model logging railroad would ever be big enough to warrant construction of a logging railroad.  Then as now, railroads required a substantial amount of capital expenditure to build, equip, and operate, and in order for them to be economically justified the sawmill had to be large enough to produce enough volume of lumber to pay for the railroad.  Sawmills supported by a railroad almost had to be bigger than what most modelers have room to display. 

Jeff Moore
Elko, NV   

Quote from: jdmike on December 01, 2010, 07:21:08 PM
How about some HO versions of the "camp" cars that Bachmann did in On30?   They could be sold seperatly or in a compelte set.   Bachmann has done the motive power, has a logging flat car and car if you want to haul the tourists.  But we need some proper camp cars for the loggers, affordable skelleton style log cars.  The flats are nice, a bit over priced IMHO for what you get.   Rivarossi used to do a nice plastic one, Kaydee still does but also higher priced and a kit that many modelers might not care to attempt.  The Skel log cars plus the bobber caboose would make the perfect train for the Shay or Climax engines!   How about structures, a nice small sawmill designed to put next to a log pond, one that would fit the average home layout and not the huge variety.  How about an unloading "jill poke" to go next to the track and some skidding donkeys to put at the log loading area and out in the woods.   Logging is the prefect small layout prototype when money is tight in the train budget.  Most logging RR's had only a couple of engines, a small sawmill and a few log skels or disconnect style trucks to haul the logs.   A small back woods engine house that is long enough to house the 3 truck Shay or Climax would also be an awsome add on sale.   Bachmann could offer a whole logging series that doesnt require the modeler to deal with craftsman style kits that make up the bulk of the logging theme buildings on the market that work on a small layout.  HO versions of all the logging items in the On30 line up would be a good start.  Walthers did a sawmill series, but it was more modern and took quite a large layout to deal with the size of the structures.   How about it Bachmann?

jdmike

agreed on the size of the mill Jeff.  Most layouts dont have the space for a real world size mill and associated buildings.  But as modelers we all know about the need to "shrink" things a bit so the modeler community can have the "feel" without having to build a large layout to just fit the mill in it.  There have been nice kits made years ago, Sydam had one if you could build a metal kit, many different wood craftsman kits ( I dont have the patience or time for those anymore).  Walthers set looks to modern for steam era logging in my eyes.   A run down looking wood sided mill is more my idea, motive power being 1 or two Climaxes or shays with a few log cars.  Probably going to use Kaydee disconnect cars myself to run behind my 3 truck Climax.  Great post Jeff, I enjoyed reading it.   Mike