News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu

Decoder for Athern GP38-2

Started by dbqfan, May 19, 2012, 04:01:00 PM

Previous topic - Next topic

dbqfan

I have a Athern GP38-2 engine. I am planning on buying a Bachmann EZ Command DCC unit. I would like to know what decoder will fit my Athern GP38-2. I would like DCC control and if possible sound also.  Thanks for the help as I am new to DCC and do not know much.

jward

digitrax makes decoders and wiring harnesses specifically for athearn locomotives.

dh123at is the basic decoder.

dh163at or dh165 at is the premium decoder with back emf (a form of cruise control).....
Jeffery S Ward Sr
Pittsburgh, PA

richg

I would go for the Dynamis, much more CV control for most non sound and sound locos.

Below is a link about the SoundTraxx decoders..

http://www.soundtraxx.com/choose/step3.php?t=ho&s=Athearn

SoundTraxx also sells a very good non sound decoder.

Bachmann uses the Tsunami for their sound locos.

Rich

Doneldon

dbq-

I, too, would go for the Dynamis system or another entry-level
system which will give you much more power and control than
the EZCommand.
                             -- D