News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu

Decoder Installation

Started by Joede, September 28, 2012, 01:09:39 PM

Previous topic - Next topic

Joede

I would like instructions for removing  the Body of a S4 loco from the chassis for installation of a decoderπ

Bucksco

Remove the screws holding the couplers in place, remove the couplers and lift off the body. After removing the shell insert the decoder into the 8 pin socket. If you install a sound decoder you will also need to install a speaker.

Joe Satnik

Dear Joede,

What scale is your S4?  What is its item number?

Please use the appropriate scale-specific sub-forum (avoid "General Discussion") when asking a scale-specific question.

Thanks.

Sincerely,

Joe Satnik 
If your loco is too heavy to lift, you'd better be able to ride in, on or behind it.