SPECTRUM 4-8-2 iTEM 81601 -- IS IT DCC READY?

Started by DAndrews, March 13, 2015, 03:43:28 PM

Previous topic - Next topic

DAndrews

I have a Spectrum USRA light Mountain 4-8-2 Item # 81601.  Can anyone advise me if it is DCC ready or not?  Much thanks in advance.  Best,  Doug

Hunt

Bachmann advertised Item No. 81601, Spectrum, painted unlettered, USRA 4-8-2 Light Mountain in November 1999 as DCC Ready.

DAndrews

Thanks Hunt for your response on this question.  I asked because the original Bachmann Spectrum box for this item says nothing on it about being DCC ready.  Moreover I have not taken the loco apart to inspect it myself.  I am not really familiar with anything DCC.  Anyway thanks again for your answer.  Best,  Doug

Hunt

Realize "DCC ready" is short for "DCC ready for a decoder to be installed."

Decoder will be installed in the tender. Look for 8-pin socket with plug or two 3 pin wires in it. This is removed and DCC decoder with 8-pin plug wiring harness installed per direction with the decoder.

DAndrews

Thanks Hunt -- Found the 8 pin socket in the tender.  Appreciate your help on this one.  Best,  Doug.