Hey Bob

[rowdymax]

How do I remove the shell from my Bachmann GP40  BNSF.   I need to lube the gears
Is there an instruction sheet I can down load for it.

[WoundedBear]

Who is Bob? 

Sid

[ACY]

You probably just need to remove the couplers and boxes and then just lift the shell up, but it could be different depending on when your model is from exactly.

[rowdymax]

My couplers are attached to the shell.  I have tried prying the fuel tanks off in hopes there would be screws or something to allow me to remove the shell.  I am afraid to pry too hard as I don't want to damage anything. 

[Ckrails]

Is this your model?

http://hoseeker.net/assemblyexplosionbachmann/bachmannemdgp40pg02.jpg

The shell should just pry off from the fuel tank.

[Bucksco]

I was also wondering who Bob was....

[rowdymax]

Yes , it is my model.  I will try that and let you know what happens   Thanks
Mike

[Ckrails]

FYI, I'm not Bob (if that matters).

[RAM]

I guess we will never know who Bob is.

[Len]

My grandson says this is 'Bob':



Len

[the Bach-man]

Oh...It's you Bob...