N Scale EZ Track Turnout Stopped Switching

Started by runninrep, February 28, 2023, 04:20:45 PM

Previous topic - Next topic

runninrep

I have an N scale train setup using EZ Track.  I re-ballasted one section near some turnouts and when I was done, one of the turnouts won't switch.  My guess is that I got some glue and/or ballast on the track area and it blocked it from being able to move.  I cleaned the area out, but now, when I try to switch it, the black manual switch on the turnout goes back and forth, but the track itself won't move.  Is this fixable, or did I break it beyond repair?

jward

Jeffery S Ward Sr
Pittsburgh, PA