News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu

Converting to DCC.

Started by CraigB, April 27, 2024, 04:10:50 PM

Previous topic - Next topic

CraigB

I currently have two separate DC EZ Track ovals running two separate locos.  One of the ovals has a left and right turnout to make a small oval within a larger oval.  I recently purchased EZ Command plus and both left and right DCC ready turnouts to convert that to DCC.  Now that ive done that im thinking about connecting the current DC oval to the DCC oval using more DCC ready turnouts.  Ive read that on DC layouts you can short circuit the system with too many turnouts.  Is that aconcern with DCC layouts as well?  Is there a general rule of thumb about how many turnouts or crossovers you can have on a DCC layout?

trainman203

#1
DO NOT connect DC powered track to DCC powered track.  You will terminally damage everything.  You need to choose one or the other on connected trackage.  I understand why people want to try to keep partial DC, to keep locomotives they've already invested in. But really, it's like graduating from elementary school to high school.  It's a different game and you don't keep stuff from the earlier grades. Leave the training wheels behind and get the big boy toys.

Whoever told you that too many track switches would short out things doesn't know what they're talking about.  There are gigantic layouts with hundreds upon hundreds of track switches that cause no short circuit problems by their numbers. It's a non-issue unrelated to mixing DC and DCC power in the same trackage.

Len

The only time switches short things out is when you use them to make a reversing loop without adding the necessary gaps and reversing circuit. Whether is a toggle switch on a DC layout, or autoreverse unit on a DCC layout.

Len
If at first you don't succeed, throw it in the spare parts box.

CraigB

Thanks guys.  I wasnt planning to mix the DC with the DCC.  I would remove the DC power supply and then connect tho old DC track to the DCC track by way of DCC ready turnouts or crossovers.  If i dont have to worry about shorts it should work fine then.  Thanks again.

trainman203

Good.  I like the idea of being to change power sources .  I don't have that but I have a few DC engines from back in the Jurassic that I'd like to run sometimes.  I'm sure that some electrical engineer here can tell you how to set up toggle switches to go back and forth.

Fred Klein

#5
Craig and Trainman, all you need is a DPDT (Double Pole, Double Throw) toggle switch. For this application, stay away from the mini or micro switches since, depending on the size of your layout and number of engines running, you may be pulling a few amps through the switch and the standard size switches can handle a greater amp load.

A DPDT switch has six terminals. Connect the center two to your track, one to each rail. Connect one set of the side terminals to the output of your DC power supply. Connect the other side to the output of your DCC controller. Now, depending to which side you flip the switch, you will either supply DC or DCC to your track. However, it is important that both the DC and DCC controllers be set to 0 before you switch power to the track just to be sure that everything is turned off in order to avoid shorts. If you you want to be a little more sure, they make DPDT switches with a CO (Center Off) position. In this position, the switch conducts no power to either side and your track is completely dead.

                   DC  Track  DCC
                       |     |     |
                     __    __    __
           Contacts             
                     __    __    __

Hope this helps.

P.S. One thing that just came to mind is that I have no idea how the decoders in DCC-ready turnouts react to straight DC current. So, if you have any of those turnouts you may want to do some research on the subject before you fry the decoders.
Fred Klein
Okeechobee, FL

trainman203

Ah yes!  I knew that some electrogenius would know how to do all that.

jward

One thing I didn't see mentioned at all is converting the existing DC locomotives to DCC. If you're handy with a soldering iron Bachmann locomotives made within the past 25 years or so are pretty simple to add a decoder to.
Jeffery S Ward Sr
Pittsburgh, PA

CraigB

Thanks for all the great info guys.  Im new to the hobby since last November and only have two (working) DC locos.  So I wasnt really thinking about switching back and forth.    I was just going to switch completely to DCC and be done with it............since I can run my DC locos on the DCC set up when I want.  But the performance of the DC locos on the DCC set up isnt as good as when they run on the DC set up.  So I may rethink that since it seems like it would be fairly easy to toggle back and forth.

trainman203

Convert the DC engines to DCC. You'll never regret it.

CraigB

Is it really thT easy to do if they are not DCC ready?

Ralph S

As always, I'm late to the conversation....
Quote...I have a few DC engines from back in the Jurassic that I'd like to run sometimes....
Quote...I understand why people want to try to keep partial DC, to keep locomotives they've already invested in. But really, it's like graduating from elementary school to high school....
My experience: If you have a large enough layout, you could keep both the DC and the DCC systems.  And yes, you could just install a DPDT switch as suggested, or separate the two electrical systems, DC and DCC from one another.  Two entirely separate tracks electrically isolated.  I wanted to keep my old "steam locomotives" which I hardly run, and the few DC diesels that I have, and they are on a separate (although short length of track).  This is what I call my museum pieces.  I can operate them, it's just that they don't go far.   My DCC track is the mother of all layouts and for the most part, I never left elementary school with the DC, but jumped directly to graduate school with DCC.  I will need you guys to let me know if I ever move from either elementary, high, or higher in this modeling career.

If you decide on the DPDT, make sure it's a "break before make" switch.  This will ensure the two power sources to not make contact with each other.   There will be an instance where someone will forget to turn off the power supplies and switch that DPDT. which is an accident waiting to happen.  Also understand that there are some models of DPDT switches that are made to make continuous contact when switching from one to source to another.  (Like switching systems from say, a DC battery supply to a DC power source.  It's called an uninterruptible power switching, where switching that DPDT switch does not cause a loss of power).
...and if you are wondering did I do that, no, but my kids did.  That's why I now have two separate power systems on my layout.

jward

Quote from: CraigB on May 02, 2024, 07:16:09 PMIs it really thT easy to do if they are not DCC ready?

It depends. WHat locomotives are you trying to convert?
Jeffery S Ward Sr
Pittsburgh, PA

CraigB

Update.  I got my first DCC loco with sound yesterday.  Bachmann Santa Fe War Bonnet diesel.  A little underwhelmed with the top end speed.  But really impressed with all the sound and light control functions.  Definitely brings the entire experience up to a new level.

trainman203

The Seemingly slow top speed is probably prototypical.  Most model engines run way too fast. 

The hard thing on models is to get them to run prototypically slowly.  When your DCC engine is on the slow side to begin with, you can really achieve remarkably slow speed Via manipulation of motor control CV's.

Does your engine have a TCS decoder? Or is it a "sound value" decoder?