News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu

First DCC Ready loco, can I add smoke?

Started by Drummerdude, November 12, 2026, 01:54:34 PM

Previous topic - Next topic

Drummerdude

So I bought the Baldwin 4-6-0 - Texas & Pacificâ„¢ #316. I also purchased a decoder for it. Am I able to add a smoke feature to it or would that not be possible? The decoder I bought it is the ESU 58410 LokSound 5 DCC/MM/SX/M4 "Blank Decoder", 8-pin NEM652 with Speaker 11x15mm ... Thanks in advance

jward

You might be able to add a smoke unit, but i'd highly advise against it. Smoke leaves an oily residue on the track that can interfere with the good electrical contact necessary to run DCC.
Jeffery S Ward Sr
Pittsburgh, PA

Drummerdude

I guess people who run smoke units have to clean way more? Im new to HO so forgive me if the question is dumb lol

Len

Even if you managed to add smoke, it would have to be connected directly to track power. Smoke units pull too much current to contol using a function output on a decoder.

Len
If at first you don't succeed, throw it in the spare parts box.

trainman203

Not only does the smoke leave residue on the track, it also gets around in the room too.

The smoke does not look realistic. You cannot scale the physics of smoke down to look real at HO scale. It always looks more like there's a cigarette up inside the locomotive.

Of course, if there's a kid involved, smoke is a positive. But I think you'd be better off buying an engine that already has a smoke unit installed in it if you really have to have it.