News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu

Bachmann EZ mate dcc controller

Started by rwiseha, February 26, 2009, 08:12:19 PM

Previous topic - Next topic

rwiseha

I have a Bachmann EZ mate dcc cintrller, that just stopped working. The new engine works on a dc controller-but not on the dcc unit.  Tried the other engine on dcc and now they don't work either.  I have all the correct lights.  Took voltage readings on the track and had .444 volts dc and 18 volts ac
I don.t know if that is normal   Does anyone have any ideas? The number of the controller is 44901/
Thanks

the Bach-man

Dear rw,
Try setting CV 8 to 8, which will reset the decoder to factory defaults.
If you have lights on the controller the problem is likely with the decoder.
Have fun!
the Bach-man

rwiseha

That was the ticket.  I had bought a used 4-4-0 on ebay, must have had a  operating # greater than 10.  Reset both my engine and all is good.
Thanks,
Rex