I found Bachmann cars in an antique store. When I brought them home , the couplers would not mate with my newer cars. The trucks are pop-in rather than screw in, but there is a screw on the coupler. Is there some way I can update the couplers?
Thanks.
This should get you on the right track:
http://www.kadee.com/conv/pdf/b16.pdf (http://www.kadee.com/conv/pdf/b16.pdf)
Len
Thanks, Len
Now all I have to do is find a tiny piece of 3/32 tubing and I can get the rewards of my great find.
have you tried the local hobby shop for tubing? usually they will have brass tubing by k&s or plastic tubing by plastruct.
Evergreen has a 6 pack of 3/32" (0.093") styrene tubing 24" long and Plastruct has a 10 pack 15" long.
Len
Instead of the tubing you can trim the (similar to the tubing) piece from a spare Kadee coupler pocket to get the shaft enlargement piece.
You ought to buy a few pair of Kadee couplers for future use. The coupler pockets to trim the piece out of are included. Most of them never get used, but these of course will.