Can a Consolidation 2-8-0 steam loco be run on a track with 18" radius EZ track? Also, what is the longest wheelbase steam loco that will operate on the 18" radius? Could you please reply based on the wheel count?

 
I have a Bachmann 51605 URSA 0-6-0 on EZ Track and a new Dynamis handheld and controller. I went through setup per the instructions on page 8 of the guide. Nothing. So I changed the Loco address on the main to 10. Changed the name, symbol, and checked the steps to make sure they were on 28. Nothing. Not even light control. So I went through the checklist on page 22 of the guide. I checked the system menu; base ID =0, remote ID =0, base serial number =000000000, base info =HW 1.0, SW 1.0, remote info HW 1.0, SW 1.0
Any ideas? It's Bachmann on Bachmann controlled by Bachmann.

Olhoss

I have a Dynamis DCC controller on the way and I am wondering how to control my existing turnouts with it. I have (2) 44561's, (2) 44562's, and (2) 44557's. The info you find from stationary decoders never include Bachmann equipment in their literature. I could not find a stationary decoder in the Bachmann product line. What's a Railroad Baron to do?

I recently purchased a Thoroughbred set as a starting point. I have added track and 2 #44557 turnouts. The turnouts function correctly using their controls. The problem is the Thoroughbred locomotive derails each time it passes over the turnouts. Any suggestions on what I should check?