mr bachman
i need the front truck and a new bottom plate or the 460 engine the one that comes in the sets it is the reading railroad one, the parts dept tell me i need to buy the hole bottom end, this is the three one that when bad broken mounts front truck fails crack bottom plate wires break any help thanks
Hi Rye,
You can't get parts, here on the "ask the Bachmann" forum. You should call Bachmann at 1-215-533-1600 and ask for the parts department.
i did that as i said in the above fourm i dont want to buy a hole lower unit just thr truck and bottom plate thanks
Sorry I should have read it better! Maybe someone will have what you need!
Rye,
I have the pilot truck frames, but I use the bottomplate in my conversions.
How many pilot truck frames do you want?
Barry - BBT
rye,
I understand the part of your posting about needing a Pony truck frame. The second part of your request, I'm not real sure what you are asking for.
Could this be the part?
(http://www.largescaleonline.com/eimages/lsolpics/Team_Member_Pics/jlsrails/Steam_Locomotives/Steam_Locomotive/100_6796.jpg)
(http://www.largescaleonline.com/eimages/lsolpics/Team_Member_Pics/jlsrails/Steam_Locomotives/Steam_Locomotive/100_6797.jpg)
This is bottom motor block cover for a battery power/RC Big Hauler. All the screw holes line up except the one at the very rear.
If this is what you are looking for you can have it no charge. I may be contacted at jlsclw@aol.com and I'd need your mailing address to send it by USPS.
One of the "Enthusiastic Children"
JD