Bachmann Online Forum

Discussion Boards => General Discussion => Topic started by: the king of the undead on June 16, 2020, 06:14:24 PM

Title: styrophoam mounting
Post by: the king of the undead on June 16, 2020, 06:14:24 PM
how would one attach a 4x8 sheet of syrofoam to a 4x8 sheet of plywood?
Title: Re: styrophoam mounting
Post by: WoundedBear on June 16, 2020, 06:50:43 PM
With a caulking gun and a tube of Liquid No Nails or other suitable adhesive. Spread the adhesive evenly with a wide putty knife before joining. Use weight while adhesive cures.

I would avoid spray adhesives for this job.

Sid
Title: Re: styrophoam mounting
Post by: the king of the undead on June 16, 2020, 07:06:36 PM
Quote from: WoundedBear on June 16, 2020, 06:50:43 PM
With a caulking gun and a tube of Liquid No Nails or other suitable adhesive. Spread the adhesive evenly with a wide putty knife before joining. Use weight while adhesive cures.

I would avoid spray adhesives for this job.

Sid
thanks! gonna assume you mean liquid nails.
Title: Re: styrophoam mounting
Post by: Len on June 16, 2020, 09:58:05 PM
Not all Liquid Nails products are safe to use on styrofoam. The one specifically intended for use on styrofoam is LN-704, Liquid Nails Interior Projects. Most home improvement stores carry it, or can order it if not in stock.

Len
Title: Re: styrophoam mounting
Post by: the king of the undead on June 17, 2020, 07:05:26 AM
Quote from: Len on June 16, 2020, 09:58:05 PM
Not all Liquid Nails products are safe to use on styrofoam. The one specifically intended for use on styrofoam is LN-704, Liquid Nails Interior Projects. Most home improvement stores carry it, or can order it if not in stock.

Len

thank you!
Title: Re: styrophoam mounting
Post by: Trainman203 on June 17, 2020, 09:25:50 AM
Be advised that styrofoam is a pretty flammable material.  Foam insulation board intended for building construction usually is required to carry at least a nominal fire rating. 
Title: Re: styrophoam mounting
Post by: WoundedBear on June 17, 2020, 10:04:20 AM
I did have the name wrong....sorry. It's Lepage's "No More Nails"

(https://media.fotki.com/2v2H7LdkMxfwZGL.jpg)

Trainman.....you worry too much about fire. The foam is no more flammable than the plywood benchmark is.

Sid
Title: Re: styrophoam mounting
Post by: Trainman203 on June 17, 2020, 10:43:52 AM
Can't help it Sid.  I was in the state fire marshal's office for years.  It was our job to worry about fire. We had no fire deaths in the commercial buildings we had jurisdiction over.

At my house I have working smoke detectors/alarms and a couple of residential fire extinguishers.
Title: Re: styrophoam mounting
Post by: the king of the undead on June 17, 2020, 11:57:01 AM
Quote from: Trainman203 on June 17, 2020, 10:43:52 AM
Can't help it Sid.  I was in the state fire marshal's office for years.  It was our job to worry about fire. We had no fire deaths in the commercial buildings we had jurisdiction over.

At my house I have working smoke detectors/alarms and a couple of residential fire extinguishers.
If I fire starts in the basement we have bigger problems then my trainset so...
Title: Re: styrophoam mounting
Post by: Trainman203 on June 17, 2020, 12:14:59 PM
Have an ABC fire extinguisher and a working smoke alarm down there.  Cheap protection.
Title: Re: styrophoam mounting
Post by: WoundedBear on June 17, 2020, 01:36:29 PM
Styrofoam is waaay down the list of flammable things I have to worry about.

The two drums of race gasoline in the shed and the oxy-acetylene set in the garage are but a couple.  ;D

Sid
Title: Re: styrophoam mounting
Post by: Len on June 17, 2020, 02:24:52 PM
According to Dow foam board is styrofoam, "Dow STYROFOAMâ„¢ Insulation (Blue Board) is a nonstructural, rigid board insulation manufactured of Extruded Polystyrene Foam (XPS)". What's different is it's an extruded form versus glued together beads like typical packing foam.

Len
Title: Re: styrophoam mounting
Post by: Terry Toenges on June 17, 2020, 03:31:08 PM
The blue board seems to be denser than the pink board. I can't say that as a fact. It just seems like it to me.
Title: Re: styrophoam mounting
Post by: Trainman203 on June 17, 2020, 07:54:55 PM
Man, Sid.  You might be one of the early civilians to go into orbit. 😂😂