News:

Please read the Forum Code of Conduct   >>Click Here <<

Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - rich1998

#31
General Discussion / Re: Soldering iron and tips
March 09, 2021, 05:16:05 PM
Same with my daughter. Never had weather this bad. I hope your trains survived.
Take care.

Rich
#32
You also. Like the Bach-Man would say, Have Fun.

Rich
#33
Yes. They look the same. I looked up the "Specs". The 44932 is for O scale and large scale.

Better prices for 44902  on ebay.

Rich
#34
General Discussion / Re: Soldering iron and tips
March 09, 2021, 01:26:04 PM
Wow, sorry to hear that. My daughter and her husband in South Central Texas kept the water running for some days with no power. She moved from Mass some years ago and knows. Many had broken pipes.

Rich
#35
The 44932 seems to be for large scale. Now the EZ Command is ok but you cannot change CV's or do a decoder reset which is not an issue for many. Good for running a train.

Rich
#36
General Discussion / Re: Soldering iron and tips
March 08, 2021, 12:33:10 PM
I have used Rosin flux since I started soldering in 1955 and brushed with alcohol after.

Rich
#37
General Discussion / Re: Short HO log bunks
March 08, 2021, 12:27:39 PM
Well I did find a set of four online with horn hook couplers. Fingers and eyes not so good now.

Rich
#38
HO / Re: Extra Trucks
March 07, 2021, 03:56:30 PM
Thank you for the history.

Rich
#39
General Discussion / Re: Short HO log bunks
March 07, 2021, 12:38:42 PM
Our club had a string of them but the club broke up some years ago. No idea where the bunks went. They looked good behind the MDC Climax at 8 mph.

Rich
#40
HO / Re: Extra Trucks
March 07, 2021, 11:28:15 AM
Same here.Never saw that before.

Rich
#41
General Discussion / Re: Short HO log bunks
March 07, 2021, 11:26:32 AM
Thank you Len. I did find two sources.

Rich
#42
Assumptions sometimes have to be made with the diagram page I have found out over the years when it comes to removing the covers.
I was going to suggest the DZ126PS to plug in. Good for one amp and really small but you must have already ordered.

Rich
#43
General Discussion / Short HO log bunks
March 06, 2021, 11:02:11 PM
Giving all my HO stuff to a nephew for his ten year old son. His grand father is helping him  lot a with Bachmann stuff. His grandfather is learning DCC. Sending him four BLI diesels. Bachmann steamers. 44 and 70 ton.
I have a HO LaFever MDC Climax well detailed that I ran at my club some years ago with short log bunks and looking for a few of those to give heim.
Ani deas?
The Kalmbach site uis down again. The Climax runes well at 9 mph with a SoundTraxx Micro, I have given him a lot of stuff so far.
I tried ebay so far. Thanks for any help.
I would take a few disconnected a glue sticks to them.

Rich
#44
HO / Re: Extra Trucks
March 06, 2021, 08:45:20 PM
If not by Bachmann, ask the supplier. Probably by accident. Sounds like no big deal. I have bought the 4-4-0 in the past. Possibly different style trucks. I think I saw a photo of that kit on eBay.

Rich
#45
also look in the information page. You will get one with the loco.

Rich